click here to send us an email.
20 Minute Panel 45 Minute Panel 60 Minute Panel 90 Minute Panel
20 Minute Glass Doors

60 Minute Positive/Negative Pressure - Panel Doors
click to open print friendly page

MINIMUM

MAXIMUM

OPENING SIZES

Singles

 

3/6 X 8/0

Singles

 

4/0 x 7/0

Pairs     NOTE: Pairs allowed with or without metal astragal.

 

7/0 X 8/0

ALLOWABLE SPECIES

Any standard species

THICKNESS

1 3/4”

2 1/4”

DIMENSIONS

Stile Face

6”

 

Top Rail Face

6”

 

Bottom Rail Face

10”

 

PANELS

Thickness - Raised

1 5/8”

2752 sq. ins.

Thickness - Flat

5/8”

2752 sq. ins.

HARDWARE                 (Must be rated)

Cylinder Locks

6” min. stile face

 

Mortise Locks

6” min. stile face

 

Minimum Latch Throw

1/2” singles /3/4” pairs

Dead Bolts

6” min. stile face

 

Automatic Flush Bolts

6” min. stile face

 

Manual Flush Bolts – standard and extension

6” min. stile face

 

Surface Vertical Rods

6” min. stile face

 

Rim Exit Device

6” min. stile face

 

Auto Door Bottom

 

Label type only

Wire Raceway

 

3/8” x 3/8”

UBC 7-2 1997 Positive Pressure Doors
(smoke & draft control)

All of the above specifications are allowed, however we must be notified if the doors will be used in a positive pressure application.

NOTE: Positive pressure doors must be installed in strict compliance to Harring Doors installation instructions for 60 minute positive pressure doors. All doors were tested under the Warnock Hersey Label.