click here to send us an email.
20 Minute Panel 45 Minute Panel 60 Minute Panel 90 Minute Panel
20 Minute Glass Doors

20 Minute Positive/Negative Pressure - Panel Doors
click to open print friendly page
OPENING SIZES

MINIMUM

MAXIMUM

Singles

 

3/6 x 8/0

Singles

 

4/0 x 7/0

Pairs     NOTE: Pairs allowed with or without metal astragal.

 

7/0 X 8/0

ALLOWABLE SPECIES

Any standard species
THICKNESS

1 3/4”

2 1/4”

DIMENSIONS

Stile Face         - cylinder lock

5”

 

                        - mortise lock

6”

 

Top Rail Face

5”

 

Bottom Rail Face

10”

 

Lock Rail Width Face

6 1/2”

 

Mullion Width Face

3”

 

Cross Rail Face

3”

 

Muntin

1”

 

PANELS

Raised

1 1/8” thick

2752 sq. ins.

Raised

1 5/8” thick

2752 sq. ins.

Flat

5/8”

2752 sq. ins.
HARDWARE                 (Must be rated)
Cylinder Locks
5” min. stile face
 
Mortise Locks
6” min. stile face
Minimum Latch Throw
1/2” singles /3/4” pairs
Dead Bolts
6” min. stile face
Automatic Flush Bolts
5” min. stile face
Manual Flush Bolts – standard and extension
6” min. stile face
Surface Vertical Rods
Rim Exit Device
Auto Door Bottom
Label type only
Wire Raceway
3/8” x 3/8”

UBC 7-2 1997 Positive Pressure Doors
(smoke & draft control)

All of the above specifications are allowed, however we must be notified if the doors will be used in a positive pressure application.

NOTE: Positive pressure doors must be installed in strict compliance to Harring Doors installation instructions for 20 minute positive pressure doors. All doors were tested under the Warnock Hersey Label.

back to top